This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector
(only two of the pins are used). The connector is the same as what is found on
the most servos and has
a 0.1" spacing, so it fits nicely with 0.1" male headers and can
plug directly into most RC receivers, servo extension cables,
and servo switch
harnesses, and custom cables made with JR male connectors or Futaba J male connectors.
Note, however, that this style of connector is often referred to as “male” in
the RC hobby industry, so please use the picture on the right to clear up any
potential confusion.
Capacity Options
Our rechargeable NiMH battery packs give you variety of options for powering
your robot or electronics project. The battery packs use 1.2 V cells and are
available in several capacities:
| Cell Type |
Capacity (mAh) |
| AA |
2200 |
| AAA |
900 |
| 2/3 AAA |
350 |
| 1/3 AAA |
200 |
The picture to the right shows the relative sizes of our NiMH battery packs.
These packs are well-suited for powering small robots, and the smaller (1/3- or
2/3-AAA) battery packs make great power sources for miniature robots, such as
those that might be based on our Baby Orangutan robot
controller.