Hanitech Battery Charger System                 

       리튬 폴리머 마이크로 충전기 

 자체 내장 배터리(4 AA batteries)로 초소형 리튬폴리머 배터리(자석 부착식 포함) 2개를 독립적으로 동시에 충전(10mA - 150mA)시킬 수 있는 마이크로 MAV 연구자들의 필수 충전기입니다.

 r 4
            LiPo charger 4 

Reasonably priced, highly recommended computer-controlled Li-Po fast charger for 1.. 4 Li-Po cells, for use with a 12 V power supply. With 1 .. 3 cells the

charger automatically detects the correct number of cells; manual selection is required with four cells. The unit automatically sets the charge current to suit the cell type connected, while the two LEDs indicate the operating mode. Protected against short-circuit, overload and reversed polarity for input and output.. Ready to use, maintenance-free.

Operating voltage 11 ... 15 V (12 V car battery, minimum

capacity 30 Ah, or mains PSU, 12 V / 5 A min.)

Charge capacity      1 ... 4 Li-Po cells

Charge current        100 mA ... 3 A

Dimensions approx. 88 x 55 x 23 mm

Weight approx.         112 g


    ULTRAMAT 12 


Operating voltage:     

11 ... 15 V

Charge / discharge facilities:

1 ?2 NiCd or NiMH cells.

 1 ...  5 LiPo or NiMH cells.

 2, 4, 6 and 12 V lead-acid batteries.

Charge current :    

100 mA ... 3 A.

Discharge current : 

10 mA?500 mA.


130 x 113 x 40 mm

Weight approx:    

520 g

 A low-cost computer-controlled all-purpose automatic fast charger with programs for discharging, measuring capacity, battery maintenance and pack balancing for most NiCd, NiMH, LiPo and lead-acid batteries. Can be powered by a 12 V car battery or a 230 V/12 V DC mains PSU. Simple operation based on clearly arranged program structure, 4-button terminal with user guidance and monitor dialogue. High-contrast two-line LCD screen displays all relevant parameters simultaneously. Functions can be set to automatic or manual. Delta-Peak cut-off detector for NiCd and NiMH cells; sensitivity can be set separately, ensuring full charges to 100% capacity. Charger can handle single cells: ideal for glow-start batteries and cell selection processes. Charger can charge 1 ... 3 LiPo cells using the constant current / constant voltage method. Declining curve after final charge voltage is reached, with automatic charge termination. Lead-acid charge programs with optimised charge curve, discharge facility, variable discharge current to determine battery capacity and residual capacity. User settings: this program stores frequently used charge parameters. If the same packs are recharged repeatedly, the chargeparameters do not need to be re-programmed. Protected against short-circuit, overload and reversed polarity. Ready to use, maintenance-free.


              Charger for NiCd/NiMh cells




  • Step up-down converter, 4~12 cells of 50mAh~3000mAh Ni-Cd or Ni-MH  
    pack can be charged rapidly.
  • Automatic Delta-peak cutoff prevents battery overcharge.
  • Output port polarity and short protection.
  • Maximum charge time: 90 minutes safety cutoff.
  • Charge current: 0.25~6A continuous.
  • Large scale current-meter.
  • Sturdy aluminum case and heat-sink for maximum heat dissipation.


       페이지 처음으로